48 results found
-
Add Option to Viewer Overlay - Performing Physician
Please add Performing Physician Tag (0008,1050) to the list of available options in the Viewer Overlay.
2 votesResolved in SmartPACS 1.7
-
CT WindowLevelPresets Defaults do not match suggested WL Presets on CT system.
There are some CT WindowLevelPresets that are suggested but not present by default on SmartPACS.
The four most common that I see used in CT (mostly small animal; in fact these are what we pre-set on our CereToms) are (in order of popularity):
Bone: 2000 @ 500
Soft Tissue: 400 @ 40
(Sharp) Lung: 1500 @ -500
Brain: 135 @ 350 votesResolved in SmartPACS 1.7
-
User Preference Default Standardization
- The SmartPACS local and admin users have some slight differences on their toolbars.
- The CT/ MR/ US toolbars do not all have Reference Line and Cine Scroll features enabled.
0 votesThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
- The SmartPACS local and admin users have some slight differences on their toolbars.
-
SmartPACS Service does not consistently start
Especially on VM systems, the SmartPACS service does not automatically start consistently and will occasionally need to be manually started.
0 votesThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
-
Viewer Tools Mislabeled - Erase Annotation vs Erase All Annotations
"Erase Annotation" needs to be updated to "Erase All Annotations"
1 voteComplete. Thank you for the Feedback.
-
Viewer User Preference - Sensitivity
The default sensitivity for SmartPACS Viewer in SmartPACS 1.6.1 is set to Max. The default should be set to Low.
Additionally, the Annotation Cursor Colour spelling should be updated to "color"
1 voteThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
-
AIS download of images as JPEG's should add the information from the overlay. An image without identifiers is ilegal.
AIS Download of images as JPEG's is missing identifiers.
3 votesThis has been completed and is update in both SmartPACS and AIS Viewers. If this is not working, please contact Customer Support.
-
Please allow the hospital/practice name to appear in the overlay information when images are exported to local as JPEG's.
Need practice name on all images when exporting as a JPEG.
3 votesThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
-
SmartPACS Favicon
It was noted that there is no favicon / browser icon set for SmartPACS or the SmartPACS Viewer.
This should be the Sound logo as displayed on http://apps.soundvet.com/smartpacs/
We will need this included in the 1.7 patch release.3 votesThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
-
Overlay burned into JPG images is not the same as the Viewer Overlay
While working through a concern, it was noted the Overlay that is burned in during the Export, Local, JPG process is not the same Overlay that is configured and defined by the user in the Viewer.
The Images with Overlay Burned in on Export should have the same Overlay as defined by the user in the User Preferences inside of the VIewer.
3 votesThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
-
Allow SmartPACS OrthoPlan to permanently save an annotation
It would be great to have the option to save the annotation as a new image instead of having to check and uncheck the correct annotation. It also ensures that the delete button is not clicked.
1 voteThis feature is now available for production use. There is a new tool called Secondary Capture. This tool will need to be added to your toolbar. Please contact Technical Support if you have any questions. Thank you for your feedback!
-
Additional Blade Sizes for SmartPACS OrthoPlan
Per Skylos sports medicine -They would like to request Veterinary Orthopedic templates be added to SmartPACS Orthoplan. They purchased TPLOE 10mm and 1.5mm
Original Email: We recently purchased a 10mm TPLO blade and 1.5mm TPLO plates from Veterinary Orthopedic Implants. Neither have a template in Orthoplan. Is this something that can be added?
Addition of the TPLO 1.5mm plate is being addressed in ticket ID 37510852. This ticket is specifically related to the addition of the 10mm TPLO/CBLO blade from VOI.
3 votesComplete. Thank you for the Feedback.
-
Templates for SmartPACS Orthoplan by VOI
Per Skylos sports medicine -They would like to request Veterinary Orthopedic templates be added to SmartPACS Orthoplan. They purchased TPLOE 10mm and 1.5mm
Original Email: We recently purchased a 10mm TPLO blade and 1.5mm TPLO plates from Veterinary Orthopedic Implants. Neither have a template in Orthoplan. Is this something that can be added?
1 voteThe VOI 1.5mm TPLO plates are now available for use.
-
Visibility of Transferred Study info for Manual Moves
It would be helpful to view the studies already sent via manual move in case a clinic is unsure if they transferred a study. Currently you can see studies transferred, but not the patient ID or name for which study.
3 votesThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
-
Viewer - Measurements & Calibration stop if cursor leaves specific image viewport.
In the Viewer if the user is performing a measurement, advanced measurement (such as TPLO, cut out, etc) or Calibration and the cursor moves outside of the current viewport frame for that specific image, the measurement/calibration will automatically end at the location where the cursor exited the frame. Listed as a bug #196
1 voteThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
-
Add Norberg Winkel Measurement to SmartPACS
This measurement is used to measure hip dysplasia and would be beneficial to have in SmartPACS
2 votesThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
-
SmartPACS OrthoPlan Templates - VOI New Template Request
11/15/18 - Jovie Aspiras captured the request for North Penn "Would like to add TPLO and TPA templates on Veterinary Orthopedics Implants"
"- under Veterinary Orthopedics Implants
- Needing TPLO and TPA to be added on the listJanie Landes
North Penn Animal Hospital acct#4195
1200 Welsh Rd
Lansdale, PA 19446
(215) 855-5853
janie@npah.com"0 votesThe NXT TPLO and the TTA Forked and Forkless Plates are now available in OrthoPlan.
Please let us know if there are any other templates that you would like to see and we will be glad to work with the implant manufacturer to get their drawings added to OrthoPlan.
Have a great day!
-
SmartPACS Viewer to Support the Export of both Compressed & Uncompressed Images
The SmartPACS Cloud and local Viewer will need to support the export of both compressed and uncompressed images. Currently the SmartPACS Study List allows for the export of Uncompressed images but the Viewer only supports JPG2000 Compressed exports.
SUGGESTED CHANGE: The Viewer Export will need a radio button allowing the user to export the images compressed or uncompressed (if available). The default can remain the compressed image copy.
After some investigation into the requirements for the most restricted required folder structure, we have come to the following conclusion on how the folders should be structured on the Study List and…
0 votesThis feature is available in SmartPACS 2.0. If you do not yet have access, please reach out to Customer Support and we will help get your SmartPACS updated.
-
OrthoPlan Default Custom Measurement Template
When performing a TPLO, a TPLO Plate template applied automatically to the image based on a User Preference selection of a TPLO favorite template.
"IF POSSIBLE IT WOULD BE GREAT IF THE USER CAN SELECT IN USER PREFERENCES (SIMILARLY TO THE LOCATION OF THE CIRCLE) WHICH IMPLANT THEY WANT PASTED AUTOMATICALLY BUT MY GUESS IS THAT’S NOT POSSIBLE SINCE IT’S A DIFFERENT WORK-FLOW. IS IT POSSIBLE TO CREATE FAVORITES? SIMPLIFYING THIS WOULD BE AMAZING! " - Dr. Felix Duerr 11/20/2018
In this instance, I would presume there should be a default template for each of the custom measurements: TPLO, TTA,…
0 votesThis feature is now available for production use. There is a new Favorite section above the Template list. This section will allow you to add a favorite template, favorite folder of templates, or create your own folder for favorite template storage. Take a look around, and please contact Technical Support if you have any questions. Thank you for your feedback!
-
OrthoPlan Ability to Select Favorite Templates - Custom Display
"What if we allowed users to toggle which implants there practice uses and which they do not. Implants are expensive and a practice tends to stick with a single or two manufactures. Effectively making their view more minimalistic only displaying templates that are pertinent to their practice. They could easily add and remove templates within the options?" Jose 10/14/15
0 votesOrthoPlan has the ability to select Favorite templates for rapid use. The user has the ability to group and label these favorites as works best for them. Thank you for the suggestion.
- Don't see your idea?